回流焊把松散的元件加热、熔融、固化成一块整机。我们的服务，也走同一条曲线。
从需求到系统架构：MCU / 传感器 / 电源 / 通信模组选型，定下整机蓝图。From requirement to architecture: MCU, sensor, power and comms module selection, blueprint locked.
PCB 与固件协作、SMT 贴片回流焊，样机在恒温与峰值中成型。PCB & firmware collaboration, SMT reflow — the prototype takes shape at soak and peak.
测试品控、小批量到量产导入，冷却固化后，零件真正成为成器。Test, QC, low-volume to mass production — once cooled, parts become real product.
一颗 RTS5453 统筹 100W PD 与 DP Alt-Mode，RTS5411 把 USB 3.2 上行分给千兆网、SD 读卡与下行口；HDMI 走 DP 桥接。附完整方案板框图。One RTS5453 governs 100W PD and DP Alt-Mode; RTS5411 splits the USB 3.2 upstream to GbE, SD reader and a downstream port; HDMI via DP bridge. Full block diagram included.
查看方案与框图 →See solution & diagram →
基于 ASIX AX58101（LT）的"分支器"：主站一条 EtherCAT 链路，经芯片内部分发到头、双臂、躯干、双腿，就地驱关节电机、读编码器与传感器。Port0↔Port2 互换支持灵活级联，特别适合人形机器人的部位级数据传输。A "junction" on ASIX AX58101 (LT): one EtherCAT link from the master is split inside the chip to head, both arms, torso and legs — driving joint motors and reading encoders / sensors locally. Port0↔Port2 swap enables flexible cascading, ideal for humanoid body-part data.
查看方案与框图 →See solution & diagram →
系统型（TwinCAT / CODESYS）、软件型（SOEM / IgH）、硬件型（讯成 ECM-XF）三种主站实现路线，把实时性、开发门槛、成本与平台锁定一张表说清，帮你早期选对方向。System (TwinCAT / CODESYS), software (SOEM / IgH) and hardware (NextW ECM-XF) master routes — real-time, dev threshold, cost and lock-in in one table, so you pick the right direction early.
阅读全文 →Read the full article →从一颗元件到一台整机，每一道工序都可控、可测、可交付。
精密贴片、回流焊与波峰焊工艺，支撑高良率组装。Precision placement, reflow & wave soldering for high-yield assembly.
从原理图到样机快速落地，缩短想法到实物的距离。From schematic to working prototype, fast — shorten the idea-to-product gap.
功能测试、老化与来料检验，让每一台都可靠。Functional test, burn-in and incoming inspection for reliability.
自有渠道直采，元件齐全、响应快、交期稳。Direct sourcing through our own channels — broad parts, fast response, steady lead time.
基于 ams OSRAM TMF8829 的 8×8~48×32 多区 dToF 模块。8×8 to 48×32 multi-zone dToF module on ams OSRAM TMF8829.
14-bit 磁编码器，电机端 + 负载端双位协同。14-bit magnetic encoder, motor + load side.
极致小体积 M.2 NVMe 转 USB 桥接 PCBA。Ultra-compact M.2 NVMe-to-USB bridge PCBA.
EtherCAT 从站驱动四路直流无刷电机。EtherCAT slave driving four BLDC motors.
真实改造：滤光片+遮光罩救强光，黑 / 透物体怎么处理，有数据。Real mods: filter+hood fix sun, dark/glass handling, with data.
每天在看的有趣电子产品。Interesting electronics we scout daily.
RK3588 具身智能控制器，机器人的"大脑级"核心。RK3588 embodied-AI controller — the brain for robots.
NVIDIA THOR 人形机器人大脑控制器。NVIDIA THOR humanoid-robot brain controller.
基于讯成 ECM-XF 硬件 EtherCAT 主站 + STM32H743，4 轴 CNC 控制器，可带 128 个从站。NextW ECM-XF hardware EtherCAT master + STM32H743, 4-axis CNC controller, up to 128 slaves.
方案养团队，成品见用户。先把企业想法落地，再把成熟方案变成好玩的产品。
ReflowKit 是一个专注硬件的新品牌。我们相信，再松散的元件，只要经过正确的回流，都能成为可靠的产品。
团队来自深圳，在半导体与电子制造领域积累多年——既懂元件，也懂怎么把想法变成能交付的整机。
无论你是企业客户需要一套定制方案，还是玩家想找点好玩的——留下信息，我们直接对接。